Product features
2 two position operation buttons+1 start
Suitable for industrial control of lifting mechanism/electric vehicle/electric door and below three contacts
standard configuration
Small and exquisite.Cost effective.easy to use
- 1 piece transmitter(include Waist Belt)
- 1 piece Protective Case
- 1 piece receiver
- Piece receiver with 1.2metre cable connector
- 1 pairs batteries
- 1 piece Receiving antenna
- 1 operation and maintenance manual
F21-TX Transmitter Parameters
| Product shell | Glass-Fiber PA |
| Size/Weight | 132×45×28mm 98g |
| Transmitter power | 2 AA alkaline batteries(not included) |
| Safety code | 32 bits(4.3billion)Never repeat ID |
| Temperature range | -35℃~+80℃ |
| Control distance | ≤100M(200M can be customized) |
F21-RX Receiver Parameters
| Product shell | Glass-Fiber PA |
| Size/Weight | 88×92×62cm 290g |
| Receiver power | 24V,36V,220V,380V voltage(you can choose) |
| Safety code | 32 bits(4.3billion)Never repeat ID |
| Temperature range | -35℃~+80 (No consider battery temperature) |
| Cable length | 1.2 metre((Other length can be customized) |
| Output contactor capacity | 5 AMP hermetically sealed relay |
Electrical schematic
security
Each remote control system has a unique identity code under all operating conditions,which means that only the correct control elements can activate and control the matching receiver to achieve maximum security.The control system has obtained FCC and CE certification.
